Products
No Splinters · No Peeling · No Painting · No Rust · No Cribbing · No Problem
LF-106 (MIGACOAT)
Equine Fence Wire is a permanent fencing solution that uses 12.5-gauge pre-straightened, galvanised high-tensile wire embedded in a durable polymer coating. This design creates a safer and more visible wire fence. The coated design eliminates the risk of slicing or cutting injuries — it installs like high-tensile wire and is engineered for long-term durability.
Features
The polymer coating eliminates the risk of slicing or cutting injuries. No exposed metal edges, no barbs, no abrasion surface. Horses that contact the fence are not at risk of laceration — the coated wire is a contact-safe boundary.
12.5-gauge pre-straightened, galvanised high-tensile wire delivers wire-class structural strength. The galvanised core resists corrosion. The high-tensile specification maintains tension under the temperature variation and load of full-outdoor deployment.
The polymer coating creates a fence that is significantly more visible than standard high-tensile wire. Wide, coloured polymer surface provides a clear visual boundary that horses learn and respect — reducing approach and collision risk.
Specifications
Colours
White
High contrast against pasture — recommended for most properties.
Brown
Lower visual profile — suited to timber or scrubland backgrounds.
Black
Bold and modern. Strong contrast on all terrain types.
Installation
Installs like high-tensile wire with standard post drivers and wire strainer tools. All ends and corners must be braced and concreted.
Mark post positions at 2.4 m – 3.0 m spacing. Set corner and end posts in concrete at 900 mm minimum depth. All non-straight ends and corners must be braced and concreted.
Allow concrete to cure fully (48 hrs min). Drive line posts to depth and confirm vertical alignment.
Fit Straight Attaching Insulated Buckles (A) onto line posts at required wire heights for line-post insulation.
Run wire from the anchor end outward through each insulated buckle on the line posts to the opposite end.
Use the Mini Spooler (B) to complete tensioning — place onto the coated wire where desired. Apply tension progressively from top wire to bottom.
Use Joining Buckles (D) to join wire sections without stripping or crimping. For electrified runs, connect energiser to wire at strainer post.
Installation Method
Component reference for wire tensioning and insulation
MLD-070
Alternative insulation type for Equine Fence Wire on line posts and corners.
View detail →MLD-070
Completes tensioning of the fence — place onto the coated wire where desired.
View detail →MLD-070
World-class design for permanent installations of electrifiable coated wire.
View detail →MLD-070
Quick, secure method to join coated wires without stripping or crimping.
View detail →
Watch installation guide
Call to action
Talk with our team about your property, your layout, and the right system combination for safer, longer-lasting equine fencing.
