Products
No Splinters · No Peeling · No Painting · No Rust · No Cribbing · No Problem
LF-MWLD-02
Specifically engineered for horse paddocks, Migarail Flexible Rail Fencing enhances equine safety and substantially lowers the incidence of paddock accidents — the most common cause of injury to horses. With low maintenance requirements and excellent weather resistance, it's the trusted fencing solution to protect your horses and your investment for years to come.
Features
Combining the superior flexibility of advanced polymer with the strength of high-tensile steel, the rail absorbs impact from falls and collisions. Wide polymer rails provide excellent visibility day and night, significantly reducing horse collisions.
The entire braid edge at both ends carries a graphene conductor — no separate conductor wire, no standoff insulators at every post. The rail itself completes the circuit. Connect the energiser directly at the strainer post.
UV stabilisers are compounded directly into the PE polymer matrix. The surface won't crack, rot, rust, or splinter. Colour retention is consistent over the product's full outdoor service life — no repainting, ever.
Specifications
Colours
White
High contrast against pasture — recommended for most properties.
Brown
Lower visual profile — suited to timber or scrubland backgrounds.
Black
Bold and modern. Strong contrast on all terrain types.
Installation
No special tools required. All ends and posts that are not in a straight line must be braced and concreted to withstand the forces.
Mark post positions at 2.4 m – 3.6 m spacing. Set corner and end posts in concrete at 900 mm depth minimum. All non-straight ends and corners must be braced and concreted.
Allow corner posts to cure fully (48 hrs min) before tensioning. Drive line posts to depth and confirm vertical alignment.
Fit Rail Brackets (E1) onto line posts at required rail heights. Snap-through design disperses impact and the polymer coating insulates the rail.
Feed rail through Rail Brackets from the end buckle outward. Attach Flex Fence End Buckle (A1/A2) at each terminus to secure the rail between the end plate and wood post.
Tension using the Rail Tensioner (B) or Barrel Tensioner (D/F). Tension progressively — top rail to bottom, half tension then full tension.
Connect energiser lead directly to the graphene braid edge at the strainer post end bracket. No separate conductor required.
Installation Version 1
Rail bracketed through line posts — standard configuration for straight runs
LF-PJHandle-03
End plate captures rail between plate and wood post at run terminus.
View detail →LF-PJHandle-07
Steel spool for tensioning Flex Rail. Suitable for 108 mm wide rail.
View detail →LF-PJHandle-05
Joins two rail sections into a continuous run. No tools required.
View detail →LF-PJHandle-03
For runs greater than 660 ft. Two-way heavy-duty steel barrel.
View detail →LF-PJHandle-04
Slip-through two-piece bracket on line posts. Disperses impact; polymer coating insulates.
View detail →LF-PJHandle-04
For start and end posts. One-way heavy-duty steel barrel tensioner.
View detail →LF-PJHandle-06
Rail glides around inside corners. Nylon rods, includes 2 screws.
View detail →LF-PJHandle-08
End plate at wood post corners. Rounded design ensures horse safety.
View detail →Installation Version 2
Rail mounted top or side of post — alternative post-mount configuration
LF-PJHandle-03
Captures Flex Fence rail between end plate and wood post. Rounded design ensures horse safety.
View detail →LF-PJHandle-04
Heavy-duty plastic top bracket for attaching rail to top of post. Compatible with Stallion Rail, Stallion Rail Ultra, Stallion Rail Extreme.
View detail →LF-PJHandle-04
Heavy-duty plastic side bracket for attaching rail to side of post. For 4-inch rail.
View detail →
Watch installation guide
Call to action
Talk with our team about your property, your layout, and the right system combination for safer, longer-lasting equine fencing.
